欢迎访问《生态学杂志》官方网站,今天是

生态学杂志 ›› 2026, Vol. 45 ›› Issue (11): 3744-3752.doi: 10.13292/j.1000-4890.202611.019

• 研究报告 • 上一篇    下一篇

锰铬金属氧化物催化降解氯苯影响因素及响应面优化

丛鑫1*,孙晓萌1,郭宏伟2


  

  1. (1辽宁工程技术大学环境科学与工程学院, 辽宁阜新 123000; 2鞍山市生态环境事务服务中心, 辽宁鞍山 114004)

  • 出版日期:2026-11-10 发布日期:2026-11-17

Influencing factors of catalytic degradation of chlorobenzene by manganese-chromium metal oxide and the response surface optimization.

CONG Xin1*, SUN Xiaomeng1, GUO Hongwei2   

  1. (1College of Environmental Science and Engineering, Liaoning Technical University, Fuxin 123000, Liaoning, China; 2Anshan Municipal Ecological Environment Affairs Service Center, Anshan 114004, Liaoning, China).

  • Online:2026-11-10 Published:2026-11-17

摘要: 氯苯是一种典型氯代挥发性有机化合物,1989年被我国列入优先控制污染物黑名单中。目前针对氯苯的研究多集中在各种类型金属催化剂及负载材料的制备、结构分析,对催化降解反应条件及其优化分析研究并不多见。本研究在较低的反应温度条件下,分析了Mn/Cr掺杂比、氧化物投加量、氧化物焙烧温度、不同种类过渡金属掺杂以及掺杂比例等因素对氯苯降解的影响。研究表明,在Mn/Cr掺杂比为1∶0.67、投加量为0.05 g、焙烧温度为450 ℃的实验条件下,氧化物材料对氯苯的降解率最高,达到了94.55%。金属Co的掺杂使得氧化物材料对氯苯的降解率提升至98.32%,较Cu、Fe掺杂效果更佳。响应面分析得到的二次多项式回归模型,氯苯降解率预测值与实验验证结果的相对偏差小于5%,证实了模型的可靠性。该研究为锰铬金属氧化物材料氧化降解氯苯,处理环境中氯代挥发性有机化合物的污染提供了理论依据和数据基础。


关键词: 锰铬金属氧化物, 催化降解, 氯苯, 氯代挥发性有机化合物

Abstract: Chlorobenzene, a typical chlorinated volatile organic compound (CVOC), has been listed as a pollutant for priority control in China since 1989. Available studies on chlorobenzene have mainly focused on the preparation and structural characterization of diverse metal catalysts and support materials, but ignored the reaction conditions and optimization strategies for its catalytic degradation. In this study, the catalytic degradation performance of chlorobenzene was investigated at relatively low reaction temperatures under the influence of Mn/Cr doping ratio, catalyst dosage, calcination temperature, and the type and doping proportion of transition metal dopants. The results showed that the manganese-chromium oxide catalyst achieved the optimal chlorobenzene degradation efficiency of 94.55% under the conditions of an Mn/Cr doping ratio of 1∶0.67, a catalyst dosage of 0.05 g, and a calcination temperature of 450 ℃. Further modification via Co doping effectively improved the catalytic performance, with the chlorobenzene degradation rate being improved to 98.32%, which was superior to that of Cu and Fe doping modifications. Additionally, the quadratic polynomial regression model established by response surface methodology  exhibited high prediction accuracy, with a relative deviation of less than 5% between the predicted values and experimental verification results, verifying the excellent reliability of the model. This study provides a solid theoretical basis and technical data support for the oxidative degradation of chlorobenzene using Mn-Cr metal oxide materials, as well as for the remediation of environmental CVOC pollution.

Key words: manganese-chromium metal oxide, catalytic degradation, chlorobenzene, chlorinated volatile organic compound